shielded power inductors C pfl1005 document 739 -1 document 739-1 revised 09/13/15 the industrys frst true 0402 size shielded power inductor. inductance 2 dcr (ohms) 3 srf typ 4 i sat (ma) 5 i rms (ma) 6 part number 1 20% (nh) typ max (mhz) 10% drop 20% drop 30% drop 20c rise 40c rise pfl1005-18nmr_ 18 0.032 0.042 3400 2000 2500 2600 1400 2000 pfl1005-36nmr_ 36 0.034 0.043 2500 1500 2400 2800 1400 2000 pfl1005-60nmr_ 60 0.042 0.050 2100 1300 1900 2100 1200 1600 pfl1005-101mr_ 100 0.059 0.075 2200 1000 1500 1900 1100 1500 pfl1005-181mr_ 180 0.19 0.21 1250 700 880 1100 900 1200 pfl1005-271mr_ 270 0.22 0.24 920 450 650 740 700 910 pfl1005-391mr_ 390 0.45 0.51 770 380 510 550 450 570 pfl1005-561mr_ 560 0.48 0.54 620 300 440 490 410 530 pfl1005-721mr_ 720 0.62 0.68 560 280 400 450 370 470 pfl1005-102mr_ 1000 0.97 1.08 460 270 350 380 310 400 core material composite core and winding loss see www.coilcraft.com/coreloss weight 1.3 C 1.8 mg environmental rohs compliant, halogen free terminations rohs compliant matte tin over nickel over silver- palladium-glass frit. ambient temperature C40c to +85c with (40c rise) i rms current. maximum part temperature +125c (ambient + temp rise). derating . storage temperature component: C40c to +125c. tape and reel packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 2000 per 7 reel paper tape: 8 mm wide, 0.68 mm thick, 2 mm pocket spacing pcb washing tested to mil-std-202 method 215 plus an additional aqueous wash. see doc787_pcb_washing.pdf . 1. when ordering, please specify packaging codes: pfl1005-102mr w packaging: w = 7 machine-ready reel. eia-481 punched paper tape (2000 parts per full reel). u = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter w instead. 2. inductance tested at 7.9 mhz, 0.1 vrms using a coilcraft smd-f test fxture and coilcraft-provided correlation pieces with an agilent/hp 4286 impedance analyzer. 3. dcr measured on a micro-ohmmeter. 4. srf measured using an agilent/hp 8753d network analyzer and a coilcraft smd-d test fxture. 5. dc current at 25c that causes the specifed inductance drop from its value without current. click for temperature derating information . 6. current that causes the specifed temperature rise from 25c ambient. this information is for reference only and does not represent absolute maximum ratings. click for temperature derating information . 7. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering.
pfl1005 series (0402) document 739-2 revised 09/13/15 document 739-2 typical l vs frequency typical l vs current te r minal wraparound: appro x 0.007/0,18 both ends recommended land p attern 0.045 1,14 0.010 0,254 0.028 0,71 max max 0.025 0,635 0.026 0,66 0.015 0,381 max 0.009 0,228 0.009 0,228 0.0206 0,523 0.020 0,508 0.038 0,966 dimensions are in inches mm 10 100 1000 10000 0.01 0.1 10 1 current (a) inductance (nh) 1000 nh 720 nh 560 nh 390 nh 270 nh 180 nh 100 nh 36 nh 10 100 1000 10000 11 0 1000 100 frequenc y (mhz) inductance (nh) 1000 nh 720 nh 560 nh 390 nh 270 nh 180 nh 100 nh 36 nh
|
